We specialize in electrical power transmission products Chain,pto shaft, agricultural gearboxes , CATV products, mechanical seal, hydraulic and Pheumatic, and promotional goods.- EPG Team the largest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Plastic Gas H2o Strength Irrigation LDPE HDPE Pipe Extrusion Manufacturing Line
HDPE Pipe Software:
Agricultural Irrigation drinking water source&Sweage drainage pipe&Discharge program&Gasoline supplly technique&Architectural water provide.
Production Flow of Pipe Generation Line:
Material →Color Mixer →Automatic Feeder→Hopper Dryer →Single Screw Extruder →Extrusion Mould & Calibrator → Vacuum Calibration Cooling Tank → Spray Cooling Tank →Printer → Haul-off Unit →Cutter →Stacker or Coiler
Features of Pipe Machiner:
1- 30m/min of greatest lineal extrusion velocity, huge capability and reduced energy consumption, and accomplished multi- layers co extrusion with 1-5 lay john deere 709 gearbox Algiers Algeria ers.
2- The copper bush is a lot more use-resisting and avert content leakage which can promise a stable running of extruder.
3- Substance feed through spiral groove, effective transmission and can properly minimize back-force on extruder.
4- Distinctive design (barrier, shearing and mixing zone) guarantees a uniformed plasticizing result, and can decrease the force on the screw which guarantees a substantial pace and steady output capability.
five- Higher torque gear box has a intelligent figuration, compact building, lower noise, high carrying ability, higher transmission efficiency can guarantee lengthy-time trouble-cost-free operation
six- PCA(pipe air cooling system) of die head largely boost the extrusion pace and reduce the cooling length of extrusion line, and improve good quality of internal pipe surface area
7- Intelligent PLC managing method with human-welcoming interface make the operation effortlessly and conveniently
eight- Chip-free cutter ensuing flat and sleek cutting surface of pipe.
Main Technical Parameter:
Machine design |
Pipe diameter | Vacuum Calibration Tank | Spray Cooling Tank | Haul-off unit | cutter | ||||
Vacuum pump | Drinking water pump |
Length(mm) | Water pump |
Size(mm) | caterpillar Quantity | Motor | Cutting type | ||
HDPE63 | φ16mm-φ63mm | 3kw*two | 3kw*two | 6000mm | 3kw*one | 6000mm | two | one.5kw*two | No dust cutter |
HDPE-110 | Φ40mm-φ110mm | 4kw*2 | 3kw*2 | 6000mm | 3kw*one | 6000mm | two | 3kw | No dust cutter |
HDPE-one hundred sixty | Φ50mm-φ110mm | 4kw*two | 4kw*2 | 6000mm | 4kw*1 | 6000mm | 3 | 1.1*3 | Planetary cutter |
HDPE-250 | Φ75mm-φ250mm | 5.5kw*2 | five.5kw*2 | 6000mm | 4kw*1 | 6000mm | three | 1.1kw*3 | Planetary cutter |
HDPE-315 | Φ110mm-φ315mm | five.5kw*2 | 5.5kw*2 | 6000mm | five.5kw*one | 6000mm | four | 1.1kw*4 | Planetary cutter |
HDPE-630 | Φ315mm-φ630mm | 7.5kw*two | seven.5kw*2 | 6000mm | 7.5kw*1 | 6000mm | six | 1.1kw*6 | Planetary cutter |
HDPE-800 | Φ400mm-φ800mm | 5.5kw*2(2m) | five.5kw*2(2m) | 6000mm | 5.5kw*two | 6000mm | 8 | 1.1kw*8 | Planetary cutter |
seven.5kw*2(10m) | 7.5kw*2(10m) | ||||||||
HDPE-1200 | Φ630mm-φ1200mm | 5.5kw*2 | 7.5kw*two | 6000mm | seven.5kw*2 | 6000mm | ten | 1.1kw*ten | Planetary cutter |
Equipment photograph:
Extrusion device
Vacuum Calibration Cooling tank & Spray Cooling tank
Haul-off Unit
Planetary Vehicle-Cutter
Plastic Pipe Stacker
If you have any questions, you should make contact with us:
Mob/Watsap/Wchat:+86 18205052682
The use of unique gear manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our firm and the listed alternative components contained herein are not sponsored, accredited, or made by the OEM.