{"id":1025,"date":"2026-03-20T02:14:00","date_gmt":"2026-03-20T02:14:00","guid":{"rendered":"https:\/\/ptoparts.top\/product\/friction-torque-limiter-for-pto-shaft\/"},"modified":"2026-03-20T02:14:14","modified_gmt":"2026-03-20T02:14:14","slug":"friction-torque-limiter-for-pto-shaft","status":"publish","type":"product","link":"https:\/\/ptoparts.top\/ru\/product\/friction-torque-limiter-for-pto-shaft\/","title":{"rendered":"Friction Torque Limiter for PTO Shaft"},"content":{"rendered":"

Friction Torque Limiter for PTO Shaft | Slip Clutch for Agricultural Driveline Protection<\/h1>\n

\nThe Friction Torque Limiter<\/strong> — variously called a friction slip clutch<\/em>, disc-type safety coupling<\/em>, adjustable torque limiter<\/em>, or spring-loaded friction clutch for PTO<\/em> — is the most versatile class of overload protection available for agricultural PTO drive shafts. By sandwiching one or more friction discs between a spring-loaded pressure plate and a hub, the device transmits torque reliably under normal conditions but slips progressively when the load exceeds the spring preload setting. The result is smooth, continuous overload protection that shields gearboxes, universal joints, and implements from damage — all without consuming any sacrificial parts. Our friction torque limiter catalog is the widest in the industry, covering torque ratings from 800 Nm to 3,000 Nm across dozens of series and sub-variants to fit every implement size and PTO configuration.\n<\/p>\n

\"Friction<\/p>\n

Product Series Overview<\/h2>\n

Our friction torque limiter range includes multiple design families optimized for different installation configurations and torque\/speed requirements:<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Design Family<\/th>\nOutput Type<\/th>\nTorque Range<\/th>\nDisc Sizes<\/th>\nKey Feature<\/th>\n<\/tr>\n<\/thead>\n
FF0 – FF2 Series<\/td>\nYoke<\/td>\n800 – 1800 Nm<\/td>\n⌀120 – ⌀160<\/td>\nStandard yoke-output, bolt & spring clamping<\/td>\n<\/tr>\n
FFV1 – FFV2 Series<\/td>\nYoke<\/td>\n900 – 1800 Nm<\/td>\n⌀140 – ⌀160<\/td>\nCompact flanged-yoke variant with complete bolt<\/td>\n<\/tr>\n
FF3 – FF4 Series<\/td>\nYoke<\/td>\n2000 – 3000 Nm<\/td>\n⌀140 – ⌀160<\/td>\nHeavy-duty, intermediate hub design<\/td>\n<\/tr>\n
FFV3 – FFV4 Series<\/td>\nYoke<\/td>\n2000 – 2800 Nm<\/td>\n⌀140 – ⌀160<\/td>\nHeavy-duty compact variant<\/td>\n<\/tr>\n
FFT0 – FFT2 Series<\/td>\nYoke<\/td>\n800 – 1200 Nm<\/td>\n⌀120 – ⌀160<\/td>\nBelleville spring design for consistent torque<\/td>\n<\/tr>\n
FFVT1 – FFVT2 Series<\/td>\nYoke<\/td>\n900 – 1200 Nm<\/td>\n⌀140 – ⌀160<\/td>\nBelleville + compact flanged yoke<\/td>\n<\/tr>\n
FFT4 \/ FFVT4 Series<\/td>\nYoke<\/td>\n1600 – 2000 Nm<\/td>\n⌀160<\/td>\nBelleville heavy-duty with hexagon board<\/td>\n<\/tr>\n
FFS \/ FFVS \/ FFST \/ FFSVT Series<\/td>\nSplined shaft<\/td>\n900 – 2500 Nm<\/td>\n⌀140 – ⌀160<\/td>\nSplined shaft output (F\/M)<\/td>\n<\/tr>\n
FCS Series<\/td>\nFlanged spline<\/td>\n800 – 1500 Nm<\/td>\n⌀125 – ⌀163<\/td>\nCompact flanged-spline design with 2 friction discs<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Available splines:<\/strong> 1 3\/8" Z6, 1 3\/8" Z21, 1 3\/4" Z6, 1 3\/4" Z20 — covering all global 540 RPM and 1000 RPM PTO standards.<\/p>\n

Highlighted Technical Data<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n
Sample Series<\/th>\nTorque (Nm)<\/th>\nDisc<\/th>\nSpline<\/th>\nA (mm)<\/th>\nB (mm)<\/th>\nC (mm)<\/th>\n<\/tr>\n<\/thead>\n
4FF0 \/ 5FF0<\/td>\n800 \/ 1000<\/td>\n⌀120<\/td>\n1 3\/8"Z6<\/td>\n135 \/ 137<\/td>\n29<\/td>\n⌀160<\/td>\n<\/tr>\n
4FF1 – 6FF1<\/td>\n1200<\/td>\n⌀140<\/td>\nZ6 \/ Z21<\/td>\n150 – 160<\/td>\n29<\/td>\n⌀180<\/td>\n<\/tr>\n
4FF2 – 8FF2<\/td>\n1500 – 1800<\/td>\n⌀160<\/td>\nZ6 \/ Z21 \/ 1 3\/4"<\/td>\n150 – 169<\/td>\n29<\/td>\n⌀200<\/td>\n<\/tr>\n
5FF3 – 6FF3<\/td>\n2000<\/td>\n⌀140<\/td>\nZ6 \/ Z21<\/td>\n168 – 176<\/td>\n29<\/td>\n⌀180<\/td>\n<\/tr>\n
5FF4 – 42FF4<\/td>\n2000 – 3000<\/td>\n⌀160<\/td>\nZ6 \/ Z21 \/ 1 3\/4"<\/td>\n168 – 190<\/td>\n29<\/td>\n⌀200<\/td>\n<\/tr>\n
FCS165 \/ FCS165D<\/td>\n800<\/td>\n⌀125<\/td>\nZ6 \/ Z6<\/td>\n140<\/td>\n20<\/td>\n⌀165<\/td>\n<\/tr>\n
FCS203 \/ FCS203D<\/td>\n1500<\/td>\n⌀163<\/td>\nZ6 \/ Z21<\/td>\n155.5<\/td>\n30<\/td>\n⌀203<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Competitive Advantages<\/h2>\n
\n
🔄 Continuous Slip Protection<\/strong>
Unlike shear bolts that break or ratchets that click, friction clutches provide smooth, progressive slip that dissipates energy gradually without interrupting the workflow.<\/div>\n
🔧 No Consumable Parts<\/strong>
Friction linings and discs are designed for thousands of slip cycles before wear replacement is needed — far more economical than shear bolt inventories.<\/div>\n
📈 Widest Series Range<\/strong>
Over 200 model variants spanning FF, FFV, FFT, FFVT, FFS, FFVS, FFST, FFSVT, and FCS families ensure a precise fit for any implement.<\/div>\n
🛠 Adjustable Torque Setting<\/strong>
Spring preload can be adjusted (on bolt-spring models) to fine-tune the slip torque to your specific application requirements.<\/div>\n
💪 Heavy-Duty Capacity<\/strong>
Up to 3,000 Nm with multi-disc configurations handles the most demanding agricultural and industrial PTO applications.<\/div>\n
🎯 Multiple Output Configurations<\/strong>
Yoke, flanged yoke, splined shaft, and flanged spline outputs provide unmatched flexibility for OEM and aftermarket integration.<\/div>\n<\/div>\n

Operational Principle<\/h2>\n

\nA stack of friction discs (or linings) is sandwiched between the hub and the pressure plate inside the housing. A set of Belleville springs or coil springs and bolts applies a calibrated clamping force to maintain frictional contact. Under normal torque, static friction locks the disc stack and transmits full rotational power. When the applied torque surpasses the friction force (determined by spring preload, disc area, and friction coefficient), the discs begin to slip, converting excess mechanical energy into heat. This controlled energy dissipation protects the entire driveline. The clutch re-engages automatically once the overload condition passes, requiring no operator intervention.\n<\/p>\n

\"PTO<\/p>\n

Application Scenarios<\/h2>\n
\n
🌾 Rotary Mowers & Cutters<\/strong>
Stone strikes generate sharp torque peaks; the friction clutch absorbs these spikes smoothly and re-engages without any bolt change.<\/div>\n
🔨 Flail Mulchers<\/strong>
Continuous contact with variable-density vegetation creates fluctuating loads. Friction slip handles these variations seamlessly.<\/div>\n
🌱 Grain Augers & Conveyors<\/strong>
Overloaded hoppers or damp grain can stall the auger; friction protection lets the clutch slip until the blockage clears.<\/div>\n
💧 Liquid Manure Spreaders<\/strong>
Thick slurry creates high starting torque; the friction disc absorbs the initial surge and delivers power progressively.<\/div>\n<\/div>\n

Limiter Technology Comparison<\/h2>\n
\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nBall Detent<\/th>\nFriction Disc<\/th>\nShear Pin<\/th>\nMagnetic Hysteresis<\/th>\n<\/tr>\n<\/thead>\n
Torque Range<\/td>\n570 – 3200 Nm<\/td>\n800 – 3000 Nm<\/td>\n570 – 4500 Nm<\/td>\n0.1 – 50 Nm (low torque)<\/td>\n<\/tr>\n
Speed Range<\/td>\n540 \/ 1000 RPM<\/td>\n540 \/ 1000 RPM<\/td>\n540 \/ 1000 RPM<\/td>\nUp to 6000 RPM<\/td>\n<\/tr>\n
Reset Method<\/td>\nAuto pop-back<\/td>\nContinuous slip \/ auto<\/td>\nManual bolt swap<\/td>\nContinuous \/ contactless<\/td>\n<\/tr>\n
Best Application<\/td>\nModerate intermittent shock<\/td>\nVaried load \/ continuous<\/td>\nCatastrophic single event<\/td>\nPrecision lab \/ packaging<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Installation Instructions<\/h2>\n
    \n
  1. Verify the spline profile, friction disc size, and overall dimensions against your implement specifications.<\/li>\n
  2. Mount the hub onto the PTO shaft using the taper pin (with nut where applicable).<\/li>\n
  3. Assemble the friction disc stack, pressure plate, and spring elements per the exploded diagram.<\/li>\n
  4. Tighten clamping bolts evenly in a star pattern to the specified torque value.<\/li>\n
  5. Attach the yoke (or splined shaft) to the implement. For FCS flanged models, bolt the flange to the implement housing.<\/li>\n
  6. Grease through the nipple and test by hand — the output should turn freely when force exceeds the setting.<\/li>\n<\/ol>\n

    Maintenance Note:<\/strong> Inspect friction linings every season. Replace when wear reduces lining thickness by more than 50 %. Check spring bolt tension annually.<\/p>\n

    Selection Guide<\/h2>\n

    \nStart by establishing the maximum continuous torque<\/strong> of your implement. Select a friction limiter with a rated torque 20–30 % above this value. Choose the appropriate design family<\/strong>: FF\/FFV for standard bolt-spring models, FFT\/FFVT for Belleville-spring models (more consistent torque over wear life), FFS\/FFVS\/FFST\/FFSVT for splined-shaft outputs, or FCS for compact flanged-spline applications. Verify the disc diameter<\/strong> matches the available radial space. Finally, confirm the spline type (Z6, Z21, 1 3\/4"Z6, Z20) matches your PTO output. Our technical team<\/a> is available to assist with non-standard configurations.\n<\/p>\n

    Quality & Certification<\/h2>\n

    \nAll friction torque limiters are produced under ISO 9001:2015<\/strong> quality management with CE marking<\/strong> for European compliance. Friction linings are tested to EN 1398 standards for heat resistance, wear rate, and coefficient stability. Every unit undergoes slip-torque validation on our dedicated dynamometer test rig. Our 12-month warranty<\/strong> covers manufacturing defects, and replacement friction kits are stocked for worldwide express delivery.\n<\/p>\n

    FAQ<\/h2>\n
    \nHow long do friction linings last?<\/summary>\n

    Under normal use with occasional slip events, linings typically last 3–5 seasons. Continuous heavy slipping accelerates wear — monitor lining thickness each season and replace when worn to 50 % of original.<\/p>\n<\/details>\n

    \nCan I increase the slip torque by tightening the bolts further?<\/summary>\n

    Within the designed adjustment range, yes. However, exceeding the maximum recommended preload can overstress the springs and damage the pressure plate. Stay within manufacturer specifications.<\/p>\n<\/details>\n

    \nWhat is the difference between FF and FFT series?<\/summary>\n

    FF models use coil springs and bolts; FFT models use Belleville (disc) springs. Belleville springs maintain more consistent torque as the linings wear because their force-displacement curve is flatter. Choose FFT for applications where consistent trip torque is critical.<\/p>\n<\/details>\n

    \nWhat is the “V” designation?<\/summary>\n

    The “V” indicates a compact variant with a flanged yoke output — shorter overall length and direct mounting capability. FFV, FFVT, FFVS, FFSVT all follow this convention.<\/p>\n<\/details>\n

    \nIs the FCS series compatible with standard PTO shafts?<\/summary>\n

    FCS series features a dual-spline design (female and male) with a flanged housing, intended for direct in-line installation between two PTO shaft sections. It is especially popular for compact implement drive trains.<\/p>\n<\/details>\n

    International Customer Experiences<\/h2>\n
    \n
    🇦🇺 Sarah L. — South Australia<\/strong>
    “We run the 7FF4 series on our 3-metre flail mulcher. The friction slip is incredibly smooth and the linings have lasted three full seasons so far.”<\/em><\/div>\n
    🇪🇸 Miguel R. — Castilla-La Mancha, Spain<\/strong>
    “The FFV2 fits perfectly on our olive harvest shaker. Compact, reliable, and easy to adjust for different tree sizes.”<\/em><\/div>\n
    🇺🇸 Mike D. — Nebraska, USA<\/strong>
    “Switched our entire fleet from shear bolts to friction clutches. Zero downtime from bolt changes and the implements are better protected.”<\/em><\/div>\n
    🇵🇱 Krzysztof W. — Greater Poland<\/strong>
    “The FCS203 is perfect for our combine header drive. Compact size, strong torque, excellent quality.”<\/em><\/div>\n
    🇨🇦 Linda M. — Alberta, Canada<\/strong>
    “Running FF4 clutches across our cattle ranch equipment. Grain augers, feed mixers, manure spreaders — they protect everything.”<\/em><\/div>\n<\/div>\n

    Complementary PTO Components<\/h2>\n

    \nPair friction torque limiters with our complete PTO shaft assemblies<\/strong><\/a>, overrunning clutches, wide-angle joints, SD-double joints, yokes, safety shields, cross journals, slip profiles, and adapters. We also supply agricultural gearboxes<\/strong><\/a> for right-angle and in-line drive configurations.\n<\/p>\n

    \"Complete<\/p>\n

    Request Bulk Pricing →<\/a><\/p>","protected":false},"excerpt":{"rendered":"

    The Friction Torque Limiter is the most versatile overload protection device for agricultural PTO shafts, using spring-loaded friction discs to deliver smooth, continuous slip when torque exceeds the calibrated setting. Unlike shear bolts that break or ratchets that click, friction clutches dissipate excess energy progressively \u2014 protecting gearboxes and driveline components without interrupting workflow or consuming sacrificial parts. Our industry-leading range spans 800\u20133,000 Nm across over 200 model variants including standard yoke (FF), compact flanged (FFV), Belleville-spring (FFT), splined shaft (FFS), and compact dual-spline (FCS) configurations. Adjustable torque settings, long-life friction linings, and global spline compatibility make this the preferred choice worldwide.<\/p>","protected":false},"featured_media":1024,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_cat":[4936],"product_tag":[5088,4989,5382,5383,5087,5085,5381,5384,5380,5385],"class_list":{"0":"post-1025","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-torque-limiters","7":"product_tag-adjustable-torque-limiter","8":"product_tag-agricultural-slip-clutch","9":"product_tag-belleville-spring-clutch","10":"product_tag-disc-type-safety-coupling","11":"product_tag-friction-disc-clutch","12":"product_tag-friction-torque-limiter","13":"product_tag-pto-friction-clutch","14":"product_tag-pto-overload-device","15":"product_tag-slip-clutch","16":"product_tag-spring-loaded-friction-clutch","18":"first","19":"instock","20":"shipping-taxable","21":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/product\/1025","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/comments?post=1025"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/media\/1024"}],"wp:attachment":[{"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/media?parent=1025"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/product_cat?post=1025"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/ptoparts.top\/ru\/wp-json\/wp\/v2\/product_tag?post=1025"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}