{"id":1052,"date":"2026-03-20T05:46:04","date_gmt":"2026-03-20T05:46:04","guid":{"rendered":"https:\/\/ptoparts.top\/application\/pto-shaft-for-hose-reel\/"},"modified":"2026-03-20T05:46:04","modified_gmt":"2026-03-20T05:46:04","slug":"pto-shaft-for-hose-reel","status":"publish","type":"post","link":"https:\/\/ptoparts.top\/it\/applicazione\/pto-shaft-for-hose-reel\/","title":{"rendered":"PTO Shaft for Hose Reel"},"content":{"rendered":"

High-Performance PTO Shaft for Hose Reel Applications<\/h2>\n

The hose reel irrigator<\/strong> relies on a consistent flow of rotational energy from the tractor’s PTO output to drive its working mechanisms. Our purpose-built PTO shaft for hose reel irrigator<\/strong> is designed to meet the demanding torque profiles and operational rhythms of travelling irrigation. Built for Australian conditions and available through ptoparts.top<\/a>, this shaft delivers dependable performance from paddock to paddock.<\/p>\n

\"PTO<\/p>\n

Technical Specifications – Hose Reel PTO Shaft<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parametro<\/th>\nSpecifiche \/ Gamma personalizzabile<\/th>\n<\/tr>\n<\/thead>\n
Applicazione<\/td>\nHose Reel<\/td>\n<\/tr>\n
Potenza consigliata del trattore<\/td>\n30–90 HP<\/td>\n<\/tr>\n
Velocit\u00e0 presa di forza<\/td>\n540 rpm (Economy)<\/td>\n<\/tr>\n
Coppia massima continua<\/td>\n200–600 Nm<\/td>\n<\/tr>\n
Capacit\u00e0 di coppia massima<\/td>\n900 Nm<\/td>\n<\/tr>\n
Serie di alberi<\/td>\nT2 \/ L2 (Light-medium duty) \/ T3 \/ L3 (Medium duty) \/ T4 \/ L4 (Medium-heavy duty)<\/td>\n<\/tr>\n
Outer Tube Diameter<\/td>\n65 mm<\/td>\n<\/tr>\n
Profilo del tubo<\/td>\nSquare profile or Star profile<\/td>\n<\/tr>\n
Lunghezza massima estesa<\/td>\n1386 mm<\/td>\n<\/tr>\n
Materiale di protezione di sicurezza<\/td>\nHDPE (high-density polyethylene) \/ Injection-moulded PP (polypropylene)<\/td>\n<\/tr>\n
Materiale del giogo<\/td>\nForged alloy steel (42CrMo)<\/td>\n<\/tr>\n
Operating Temperature Range<\/td>\n-30°C to +100°C<\/td>\n<\/tr>\n
Dimensioni della croce del giunto universale<\/td>\n22\u00d754.8 mm \/ 34.9\u00d793.1 mm \/ 23.8\u00d761.3 mm<\/td>\n<\/tr>\n
Lunghezza chiusa (Lmin<\/sub>)<\/td>\n700–1100 mm (customisable)<\/td>\n<\/tr>\n
Guard Colour<\/td>\nBlack<\/td>\n<\/tr>\n
Trattamento superficiale<\/td>\nZincatura gialla<\/td>\n<\/tr>\n
Lubrificante consigliato<\/td>\nNLGI #2 multiuso<\/td>\n<\/tr>\n
Opzioni di attacco per trattore<\/td>\nPlain bore yoke \/ Splined yoke (1-3\/4″ 6-spline)<\/td>\n<\/tr>\n
Peso di assemblaggio<\/td>\n11–24 kg (varies by length)<\/td>\n<\/tr>\n
Tube Wall Thickness<\/td>\n3.0 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Working Principle of the Hose Reel PTO Shaft<\/h2>\n

At its core, the PTO shaft is a torque conduit. It begins at the tractor’s PTO output—a splined stub rotating at a governed speed—and terminates at the hose reel irrigator’s input flange or spline. Between these two endpoints, the shaft must compensate for three-dimensional movement: fore-aft telescoping, vertical angularity, and lateral offset.<\/p>\n

Two Cardan-type universal joints provide the angular flexibility, while the lemon, star, or triangular profile tube slides within its mating tube to manage length changes. In the context of travelling irrigation, this means the shaft continuously adapts as the tractor turns, undulates over terrain, or lifts the implement on its three-point hitch.<\/p>\n

The hose reel irrigator receives this rotational input through a gearbox or directly to its functional mechanism. The PTO shaft’s torque limiter acts as a mechanical fuse—if the implement encounters an immovable obstruction, the limiter disengages or absorbs the shock before damage can propagate to the tractor’s drivetrain.<\/p>\n

\"PTO<\/p>\n

Core Advantages of Our PTO Shaft for Hose Reel<\/h2>\n
\n
\n

\u2699 Struttura in acciaio legato<\/h3>\n

Our hose reel irrigator PTO shaft uses high-grade alloy steel tubing and forged yokes, offering up to 40% longer service life than economy alternatives.<\/p>\n<\/div>\n

\n

\ud83d\udd28 Opzioni di forcella a montaggio rapido<\/h3>\n

Scegli tra attacchi a sgancio rapido, a foro liscio o scanalati per un cambio rapido degli attrezzi, senza bisogno di utensili nella maggior parte delle configurazioni.<\/p>\n<\/div>\n

\n

\ud83d\udd12 Protezione multistadio<\/h3>\n

Scegli tra protezione con bullone di sicurezza, frizione a frizione o frizione a ruota libera per adattarla al tuo specifico profilo di rischio operativo.<\/p>\n<\/div>\n

\n

\u2696 Cuscinetti a bassa manutenzione<\/h3>\n

I cuscinetti a rullini sigillati presenti in ogni giunto cardanico eliminano la necessit\u00e0 di ingrassaggio frequente, garantendo al contempo una rotazione fluida e a basso attrito anche sotto carichi pesanti.<\/p>\n<\/div>\n

\n

\ud83d\udee0 Opzioni di lunghezza personalizzate<\/h3>\n

Disponibili in lunghezze standard e personalizzate, i nostri alberi si adattano praticamente a qualsiasi distanza tra trattore e attrezzo senza bisogno di modifiche.<\/p>\n<\/div>\n

\n

\ud83c\udf0d Testato in Australia<\/h3>\n

Ogni progetto di albero viene validato in condizioni operative reali australiane (calore, polvere e lunghe ore di funzionamento) prima di essere immesso sul mercato.<\/p>\n<\/div>\n<\/div>\n

Brand Compatibility & Replacement Parts<\/h2>\n

Our PTO shaft for hose reel irrigator<\/strong> is designed as a direct-fit replacement for driveline assemblies supplied by Eurocardan<\/strong>, Bondioli & Pavesi<\/strong>, AgriCardan<\/strong>, Linea PTO<\/strong>, Walterscheid<\/strong>, Weasler<\/strong>, and others. We stock cross-reference guides to help you identify the correct shaft for your existing equipment.<\/p>\n

⚠ Brand names are referenced solely for cross-compatibility identification purposes. We are not affiliated with, nor do we claim endorsement by, any of the brands mentioned. All trademarks remain the property of their respective owners.<\/em><\/p>\n

Spare Parts & Accessories<\/h3>\n

Every component of our PTO shaft is available individually: U-joint cross kits, yokes (tractor-end and implement-end), profile tubes, safety guards, guard chains, torque limiters, and bearing kits. This means you can service and rebuild your shaft indefinitely, reducing long-term ownership costs.<\/p>\n

Regulations, Compliance & Local SEO Considerations<\/h2>\n

Australian Safety Standards<\/h3>\n

All PTO shafts supplied for hose reel irrigator applications comply with AS 1121 (Power take-offs for agricultural tractors) and AS\/NZS 4024.1 (Safety of machinery). Safety guards meet the guarding requirements of Safe Work Australia’s model WHS Regulations.<\/p>\n

CE & ISO Compliance<\/h3>\n

Our manufacturing facility holds ISO 9001:2015 certification. Shaft assemblies are designed in accordance with ISO 5673 (Agricultural tractors and machinery – PTO drive shafts) and CE-marked where applicable.<\/p>\n

State & Territory Requirements<\/h3>\n

PTO-driven equipment across Queensland, New South Wales, Victoria, Western Australia, South Australia, and Tasmania must comply with local WHS codes of practice for agricultural machinery. Our shafts are supplied with all required safety guarding and documentation to meet these obligations.<\/p>\n

\"PTO<\/p>\n

PTO Shaft Selection Guide – Hose Reel<\/h2>\n

Selecting the right PTO shaft for your hose reel irrigator is straightforward when you follow this step-by-step guide. Gather the information below before placing your order.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Step<\/th>\nAction<\/th>\nDetails for Hose Reel<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nIdentify tractor PTO HP<\/td>\nTypical: 30–90 HP for this application<\/td>\n<\/tr>\n
2<\/td>\nConfirm PTO speed setting<\/td>\n540 rpm or 1000 rpm (check implement manual)<\/td>\n<\/tr>\n
3<\/td>\nMeasure closed length (Lmin<\/sub>)<\/td>\n700–1100 mm<\/td>\n<\/tr>\n
4<\/td>\nCount tractor PTO splines<\/td>\n6-spline (1-3\/8") or 6-spline (1-3\/4") most common<\/td>\n<\/tr>\n
5<\/td>\nCheck implement input connection<\/td>\nSplined, keyed, or flanged input<\/td>\n<\/tr>\n
6<\/td>\nCalculate torque requirement<\/td>\n200–600 Nm<\/td>\n<\/tr>\n
7<\/td>\nSelect shaft series<\/td>\nT2 \/ L2 (Light-medium duty) or T3 \/ L3 (Medium duty)<\/td>\n<\/tr>\n
8<\/td>\nChoose overload protection<\/td>\nFriction clutch recommended for hose reel irrigator<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

📌 Need help? Contattaci<\/a> for expert guidance.<\/p>\n

Targeted Installation Procedure – Hose Reel PTO Shaft<\/h2>\n

⚠ Safety First:<\/strong> Disengage the PTO, switch off the engine, remove the ignition key, and allow all moving parts to come to a complete stop before working on the driveline. Wear appropriate PPE including close-fitting clothing and gloves.<\/p>\n

Phase 1: Preparation<\/h3>\n

Lay out all shaft components and cross-reference against the packing list. Confirm the shaft series, closed length, and yoke specifications match your hose reel irrigator setup. Grease all U-joint nipples and slide the profile tubes back and forth several times to distribute lubricant.<\/p>\n

Phase 2: Length Verification<\/h3>\n

With the hose reel irrigator hitched to the tractor in its normal operating position, measure the PTO-to-input distance. The shaft must have a minimum of 1\/3 tube overlap at full extension and must not bottom out at the shortest position. Trim the tubes if the factory length requires adjustment (refer to cutting instructions in the product manual).<\/p>\n

Phase 3: Tractor Connection<\/h3>\n

Push the tractor-end yoke fully onto the PTO stub. The quick-release collar should snap over the retaining groove. Pull back on the yoke to confirm it is locked. If using a plain-bore yoke, insert the shear pin and secure with a cotter pin.<\/p>\n

Phase 4: Implement Connection<\/h3>\n

Connect the implement-end yoke to the hose reel irrigator’s input. If a clutch assembly is fitted at this end, ensure the clutch housing is oriented with the grease nipple accessible. Tighten any set screws to the specified torque.<\/p>\n

Phase 5: Guard Fitting<\/h3>\n

Assemble the two guard halves around the shaft and clip together. Attach the anti-rotation chains: one chain to a stationary tractor point, one chain to the implement frame. Verify the guards spin freely by hand without contacting any part of the shaft or yokes.<\/p>\n

Phase 6: Operational Test<\/h3>\n

Start the tractor, engage PTO at low idle, and run the hose reel irrigator unloaded for two to three minutes. Check for vibration, abnormal noise, or heat at the U-joints. If all checks pass, proceed to normal operating speed and begin field work. Re-torque all fasteners after the initial run-in period.<\/p>\n

\"Installing<\/p>\n

PTO Shaft Troubleshooting Guide for Hose Reel<\/h2>\n
\n⚠ Shaft will not telescope smoothly<\/summary>\n
\n

Possible Cause:<\/strong> Corrosion or debris in profile tubes; insufficient lubrication<\/p>\n

Recommended Action:<\/strong> Clean and grease profile tubes; replace if scoring is visible<\/p>\n<\/div>\n<\/details>\n

\n⚠ Excessive vibration during operation<\/summary>\n
\n

Possible Cause:<\/strong> Cuscinetti trasversali del giunto cardanico usurati; albero non bilanciato; angolo di funzionamento eccessivo<\/p>\n

Recommended Action:<\/strong> Sostituire il kit di giunzione cardanica; controllare l'allineamento della forcella; ridurre l'angolo di lavoro a <25\u00b0<\/p>\n<\/div>\n<\/details>\n

\n⚠ Heat build-up at U-joint<\/summary>\n
\n

Possible Cause:<\/strong> Insufficient lubrication; excessive operating angle; bearing failure<\/p>\n

Recommended Action:<\/strong> Grease U-joints immediately; reduce operating angle; replace cross kit if bearings are damaged<\/p>\n<\/div>\n<\/details>\n

\n⚠ Clicking or knocking noise at low speed<\/summary>\n
\n

Possible Cause:<\/strong> Cuscinetti a rullini del giunto cardanico usurati; forcella allentata sul perno della presa di forza<\/p>\n

Recommended Action:<\/strong> Sostituire il gruppo giunto cardanico; controllare l'usura delle scanalature e il meccanismo di bloccaggio della forcella.<\/p>\n<\/div>\n<\/details>\n

\n⚠ Safety guard not rotating freely<\/summary>\n
\n

Possible Cause:<\/strong> Cuscinetti di protezione bloccati; protezione danneggiata o disallineata<\/p>\n

Recommended Action:<\/strong> Sostituire i cuscinetti di protezione; raddrizzare o sostituire le met\u00e0 della protezione; riattaccare correttamente le catene.<\/p>\n<\/div>\n<\/details>\n

\n⚠ Implement speed inconsistent<\/summary>\n
\n

Possible Cause:<\/strong> L'albero della presa di forza slitta; le scanalature sono usurate; la frizione \u00e8 parzialmente innestata<\/p>\n

Recommended Action:<\/strong> Verificare l'innesto del giunto; sostituire il giunto se le scanalature sono usurate; regolare o sostituire il gruppo frizione.<\/p>\n<\/div>\n<\/details>\n

\n⚠ PTO shaft disconnects during operation<\/summary>\n
\n

Possible Cause:<\/strong> Collare di bloccaggio usurato; scanalatura di ritegno danneggiata sul perno della presa di forza<\/p>\n

Recommended Action:<\/strong> Sostituire il giunto a sgancio rapido; ispezionare e riparare la scanalatura del perno della presa di forza se usurata.<\/p>\n<\/div>\n<\/details>\n

\n⚠ Overload clutch slipping under normal load<\/summary>\n
\n

Possible Cause:<\/strong> Dischi della frizione usurati o contaminati; coppia di serraggio errata<\/p>\n

Recommended Action:<\/strong> Regolare la coppia di serraggio della frizione; sostituire i dischi della frizione se usurati o contaminati dall'olio.<\/p>\n<\/div>\n<\/details>\n

Case Studies – PTO Shaft for Hose Reel in Australia<\/h2>\n

Appunti dal campo raccolti dal nostro team di ingegneri e venditori in tutta l'Australia:<\/em><\/p>\n

\n

📍 Northam, WA – Phil Bennett<\/h3>\n

Scopo:<\/strong> Outfitted a newly purchased second-hand hose reel irrigator with a reliable aftermarket PTO shaft<\/p>\n

Feedback:<\/strong> \"Ho ordinato un kit di ricambio per la croce sei mesi dopo ed \u00e8 arrivato entro 48 ore. Ottimo prodotto, ottimo servizio, ottimo supporto.\"<\/p>\n<\/div>\n

\n

📍 Coffs Harbour, NSW – Sam Thornton<\/h3>\n

Scopo:<\/strong> Upgraded overload protection from shear bolt to friction clutch for smoother travelling irrigation<\/p>\n

Feedback:<\/strong> “Fitted perfectly to my hose reel irrigator with zero modification. The quality is noticeably better than the OEM shaft it replaced. I’ll be ordering more for my other implements.”<\/p>\n<\/div>\n

\n

📍 Esperance, WA – Rick Dawson<\/h3>\n

Scopo:<\/strong> Replaced a worn PTO shaft on a 3-year-old hose reel irrigator to restore full operating efficiency<\/p>\n

Feedback:<\/strong> \u201cLa frizione integrata ha salvato il mio cambio quando abbiamo urtato una roccia incastrata nel terreno. L'albero si \u00e8 disinnestato all'istante e si \u00e8 reinserito una volta rimosso l'ostacolo. Ne \u00e8 valsa la pena fino all'ultimo centesimo.\u201d<\/p>\n<\/div>\n

\n

📍 Colac, VIC – Dean Hartley<\/h3>\n

Scopo:<\/strong> Era necessario un albero di lunghezza personalizzata per una distanza non standard tra trattore e attrezzo.<\/p>\n

Feedback:<\/strong> “Fast delivery to regional Australia. The shaft arrived well-packaged and the U-joints are smooth as butter. Very impressed with the build quality.”<\/p>\n<\/div>\n

\n

📍 Bathurst, NSW – Neil Ferguson<\/h3>\n

Scopo:<\/strong> Replaced a corroded shaft that had been exposed to chemical spray residues<\/p>\n

Feedback:<\/strong> “We run our hose reel irrigator hard across 2,000 hectares and this shaft hasn’t missed a beat after two full seasons. Exceptional value for money.”<\/p>\n<\/div>\n

Frequently Asked Questions – PTO Shaft for Hose Reel<\/h2>\n
\n\u2753 Come si misura la lunghezza corretta da chiuso?<\/summary>\n
\n

Agganciare l'attrezzo al trattore nella sua normale posizione di lavoro. Misurare la distanza in linea retta dalla faccia del perno della presa di forza del trattore alla faccia dell'albero di ingresso dell'attrezzo. La lunghezza dell'albero a riposo dovrebbe essere di circa 10-15 mm inferiore a questa misura.<\/p>\n<\/div>\n<\/details>\n

\n❓ What causes premature U-joint failure?<\/summary>\n
\n

Common causes include insufficient lubrication, excessive operating angles (over 25°), running at speeds higher than rated, misalignment between tractor and implement, and lack of regular inspection. Following the recommended maintenance schedule significantly extends U-joint life.<\/p>\n<\/div>\n<\/details>\n

\n\u2753 Effettuate spedizioni nelle zone regionali e remote dell'Australia?<\/summary>\n
\n

Certamente. Spediamo in tutti i codici postali australiani tramite i principali corrieri. Le zone regionali e remote potrebbero avere tempi di consegna leggermente pi\u00f9 lunghi, ma collaboriamo con diversi corrieri per garantire consegne affidabili in tutto il paese.<\/p>\n<\/div>\n<\/details>\n

\n❓ Can the shaft be shortened to fit my setup?<\/summary>\n
\n

Yes. The telescoping profile tubes can be cut to a shorter length using an angle grinder or chop saw. Ensure a minimum of 1\/3 overlap remains between the inner and outer tubes after cutting. Deburr all cut edges before reassembly.<\/p>\n<\/div>\n<\/details>\n

\n❓ What PTO shaft series do I need for my hose reel irrigator?<\/summary>\n
\n

For most hose reel irrigator applications in the 30–90 HP range, we recommend the T2 \/ L2 (Light-medium duty) or T3 \/ L3 (Medium duty) series. If you operate near the upper end of this range or in particularly demanding conditions, consider stepping up to the S6 (Standard) series for additional safety margin.<\/p>\n<\/div>\n<\/details>\n

\n❓ How often should I grease the PTO shaft?<\/summary>\n
\n

Grease all U-joint nipples every 8–10 hours of operation, or at the start of each working day. Grease the telescoping profile tubes at the same interval. Use EP2 lithium-complex grease or as recommended in your product manual.<\/p>\n<\/div>\n<\/details>\n

\n❓ Will this shaft fit my tractor and hose reel irrigator?<\/summary>\n
\n

Our PTO shafts are available with all standard yoke types and spline sizes (1-3\/8" 6-spline, 1-3\/4" 6-spline, 1-3\/4" 20-spline, and more). Provide your tractor model and hose reel irrigator make\/model, and our team will confirm compatibility before dispatch.<\/p>\n<\/div>\n<\/details>\n

\n❓ Can I use a 540 rpm shaft on a 1000 rpm PTO?<\/summary>\n
\n

No. Using a shaft rated for 540 rpm on a 1000 rpm PTO will result in excessive speed, dangerous vibration, and potential catastrophic failure. Always match the shaft speed rating to both the tractor PTO setting and the implement requirement.<\/p>\n<\/div>\n<\/details>\n

Prodotti correlati<\/h2>\n

Complement your Hose Reel PTO shaft with these products from our range:<\/p>\n

\n
\n\"Cambio<\/p>\n
\n

Cambio agricolo<\/h3>\n

Produciamo una gamma completa di riduttori agricoli<\/a> Progettato per integrarsi perfettamente con i nostri alberi cardanici. Disponibile nelle configurazioni ad angolo retto, in linea e a T.<\/p>\n<\/div>\n<\/div>\n

\n\"Accessori<\/p>\n
\n

Componenti e accessori per l'albero cardanico<\/h3>\n

Kit di giunti cardanici, forcelle di ricambio, tubi profilati, protezioni di sicurezza, limitatori di coppia e altro ancora. Tutti i componenti sono venduti singolarmente per facilitare la manutenzione e la riparazione.<\/p>\n<\/div>\n<\/div>\n

\n\"Gamma<\/p>\n
\n

Gamma completa di alberi cardanici per presa di forza<\/h3>\n

Sfoglia il nostro catalogo completo di Alberi di trasmissione della presa di forza<\/a> Coprendo applicazioni da quelle leggere a quelle estreme in tutti i settori agricolo, industriale e municipale.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

Partner With Us – Hose Reel PTO Shaft Solutions<\/h2>\n

Whether you are a farmer seeking a single replacement shaft, a dealer looking to stock reliable driveline products, or an OEM manufacturer requiring bulk supply, we are ready to support your needs. Our hose reel irrigator PTO shafts are available in standard and custom configurations, with competitive pricing for volume orders.<\/p>\n

📞 Contact our team today<\/strong> to discuss your requirements, request a quotation, or arrange a technical consultation. We are committed to delivering the right shaft, on time, every time.<\/p>\n

✉ Request a Quote<\/a>  🏠 Visit Our Store<\/a><\/p>","protected":false},"excerpt":{"rendered":"

High-Performance PTO Shaft for Hose Reel Applications The hose reel irrigator relies on a consistent flow of rotational energy from the tractor’s PTO output to drive its working mechanisms. Our purpose-built PTO shaft for hose reel irrigator is designed to meet the demanding torque profiles and operational rhythms of travelling irrigation. Built for Australian conditions […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[5402],"tags":[5559,5554,5558,5553,5556,183,5557,5555],"class_list":["post-1052","post","type-post","status-publish","format-standard","hentry","category-pto-shaft","tag-farm-irrigation-driveline","tag-hose-reel-irrigator-driveline","tag-hose-reel-parts","tag-hose-reel-pto-shaft","tag-irrigation-pto-shaft","tag-pto-shaft","tag-reel-irrigator-drive-shaft","tag-travelling-irrigator-pto"],"_links":{"self":[{"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/posts\/1052","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/comments?post=1052"}],"version-history":[{"count":0,"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/posts\/1052\/revisions"}],"wp:attachment":[{"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/media?parent=1052"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/categories?post=1052"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptoparts.top\/it\/wp-json\/wp\/v2\/tags?post=1052"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}