PTO Shaft for Tree Shaker – Heavy-Duty Power Transmission Solutions
Operating a tree shaker demands reliable, uninterrupted rotational power delivered from the tractor’s power take-off (PTO) to the implement. Our PTO shaft for tree shaker is precision-engineered to handle the unique torque loads, speed requirements, and environmental stresses of mechanical fruit and nut harvesting. Whether you manage broadacre farming or intensive horticulture, this PTO drive shaft ensures peak performance season after season.
Technical Specifications – Tree Shaker PTO Shaft
| Parameter | Spesifikasi / Rentang yang Dapat Disesuaikan |
|---|---|
| Aplikasi | Tree Shaker |
| Rekomendasi Tenaga Kuda Traktor | 80–350 HP |
| Kecepatan PTO | 1000 rpm |
| Torsi Kontinu Maksimum | 800–2500 Nm |
| Kapasitas Torsi Puncak | 3750 Nm |
| Seri Poros | T5 / L5 (Tugas berat) / T6 / L6 (Tugas super berat) / T7 / L7 (Tugas ultra berat) |
| Warna Penjaga | Orange (RAL 2004) |
| Closed Length (Lmin) | 900–1500 mm (customisable) |
| Kekerasan Spline | HRC 55-60 |
| Dynamic Balance | Dynamically balanced to ISO 1940 G16 |
| Tube Wall Thickness | 4.5 mm |
| Jenis Bantalan Sambungan U | Precision needle roller |
| Sudut Operasi Maksimum | 80° |
| Opsi Yoke Ujung Implementasi | Splined yoke (1-3/4″ 20-spline) / Plain bore yoke |
| Perawatan Permukaan | Black oxide coated |
| Universal Joint Cross Size | 22×54.8 mm / 23.8×61.3 mm / 27×70 mm |
| Opsi Perlindungan Beban Berlebih | Shear bolt torque limiter / Friction clutch torque limiter / Free-wheel overrunning clutch |
| Berat Rakitan | 15–39 kg (varies by length) |
| Diameter Tabung Luar | 42 mm |
| Maximum Extended Length | 1752 mm |
How a PTO Shaft Works on a Tree Shaker
The PTO shaft transmits rotational energy from the tractor’s rear PTO stub to the input shaft of the tree shaker. The assembly consists of two yokes connected by a telescoping profile tube, with universal joints (U-joints) at each end allowing angular misalignment as the tractor and implement articulate over uneven ground.
During mechanical fruit and nut harvesting, the tractor PTO stub rotates at a standardised speed. This rotation passes through the first U-joint, travels along the profile tube (which telescopes to accommodate changes in distance), and exits through the second U-joint into the implement gearbox. A safety guard encloses the entire rotating assembly to prevent entanglement.
On the tree shaker specifically, the PTO shaft drives the main gearbox, which in turn powers the working elements. Overload protection—typically a shear bolt or friction clutch—is integrated at the implement-end yoke to safeguard the driveline against sudden blockages or shock loads.
Core Advantages of Our PTO Shaft for Tree Shaker
⚙ Heat-Treated Components
Every yoke and U-joint cross in our tree shaker PTO shaft is induction-hardened and tempered, delivering superior fatigue resistance compared to standard cast components.
⚖ Precision-Balanced Assembly
Computer-balanced shaft assemblies minimise vibration, reducing wear on tractor and implement bearings and extending overall driveline life.
🔒 Integrated Overload Protection
Factory-fitted torque limiters protect your investment by automatically disengaging under shock loads, preventing costly repairs to gearboxes and drivelines.
🔧 Telescoping Design
Profile tubes telescope smoothly to accommodate field undulations and turning manoeuvres, ensuring consistent power delivery during operation.
🛡 Full Safety Guarding
CE-compliant safety shields with bearing-mounted rotation enclose the entire shaft, meeting Australian WHS requirements and protecting operators.
🏆 Extended Warranty
We stand behind our products with an industry-leading warranty, reflecting our confidence in the durability and reliability of every PTO shaft we supply.
Compatible Brands & Interchangeable Parts
Farmers and contractors running tree shaker equipment from GKN Walterscheid, Profil Terhubung, Bondioli & Pavesi, AgriCardan, Walterscheid, Musang will find our PTO shaft a seamless replacement. We maintain a comprehensive compatibility database to match our products to thousands of OEM part numbers.
⚠ References to third-party brands are provided exclusively to facilitate product selection and cross-referencing. We do not manufacture products for these brands, nor do we hold or claim any rights to their trademarks.
Replacement Components
All shaft components are available as individual spares: universal joint kits, yokes in all standard bore sizes, telescoping tubes in various profiles, moulded safety guards, torque limiter assemblies, and complete rebuild kits. Extended availability ensures your shaft remains serviceable for years.
Standards, Policies & Regional Compliance
Australian Agricultural Machinery Standards
Our PTO shafts for tree shaker applications are manufactured in compliance with the ASABE S203 (Guard dimensions) and ISO 5673 (PTO drive shaft interfaces) standards. These standards ensure dimensional compatibility and operational safety across all Australian farming environments.
Environmental Considerations
All materials used in our PTO shafts are RoHS-compliant. Packaging is recyclable, and we offer a used-shaft return programme for environmentally responsible disposal of end-of-life components.
Regional Service Coverage
We provide service and technical support across all Australian states and territories, including regional and remote areas. Local dealers in major agricultural centres stock our most popular shaft series and replacement parts for immediate availability.
Quick Selection Guide for Tree Shaker PTO Shafts
Use the table below to determine the correct PTO shaft specification for your tree shaker. Measure your existing shaft or consult your implement manual before ordering.
| Parameter | Apa yang perlu diperiksa | Typical Range for Tree Shaker |
|---|---|---|
| Traktor HP | Periksa pelat nama traktor atau buku panduan. | 80–350 HP |
| Kecepatan PTO | Pengaturan PTO traktor & persyaratan implement | 540 atau 1000 rpm |
| Ukuran Spline PTO | Hitung jumlah alur pada poros PTO traktor. | 1-3/8" 6-spline atau 1-3/4" 6-spline |
| Panjang Tertutup Poros | Mengukur PTO traktor untuk menerapkan input | 900–1500 mm |
| Torsi yang Diperlukan | Periksa manual implementasi atau hitung dari HP/kecepatan. | 800–2500 Nm |
| Seri yang Direkomendasikan | Sesuai dengan persyaratan torsi | T5 / L5 (Tugas berat) / T6 / L6 (Tugas super berat) / T7 / L7 (Tugas ultra berat) |
| Perlindungan Beban Berlebih | Menilai risiko penyumbatan mendadak | Kopling gesek atau baut geser |
| Implementasikan Tipe Yoke | Cocokkan untuk mengimplementasikan profil poros masukan. | Lepas cepat atau bergerigi |
📌 Tidak yakin poros mana yang harus dipilih? Hubungi tim teknis kami Sertakan model traktor dan detail peralatan Anda untuk mendapatkan rekomendasi gratis.
Installation Guide – PTO Shaft on Tree Shaker
⚠ Peringatan: Selalu matikan mesin traktor, lepaskan PTO, dan tunggu hingga semua bagian yang berputar berhenti sepenuhnya sebelum memulai pemasangan. Ikuti petunjuk keselamatan dari produsen traktor dan alat pertanian Anda.
Langkah 1: Inspeksi Pra-Pemasangan
Unpack the PTO shaft and inspect all components for shipping damage. Verify that the yoke splines, U-joints, profile tubes, and safety guards are in perfect condition. Confirm the shaft series and length match your tree shaker requirements.
Langkah 2: Atur Panjang Poros yang Tepat
Park the tractor with the tree shaker in its normal working position. Measure the distance from the tractor PTO stub face to the implement input shaft face. Adjust the telescoping tubes so that the shaft closed length is approximately 10–15 mm shorter than this measured distance to allow for suspension travel.
Langkah 3: Hubungkan Yoke Ujung Traktor
Geser dudukan ujung traktor ke poros PTO. Pastikan alur terpasang sepenuhnya dan mekanisme pengunci (pin tekan atau kerah) berbunyi klik. Periksa apakah tidak ada pergerakan radial yang berlebihan.
Langkah 4: Menghubungkan Implement-End Yoke
Align the implement-end yoke with the tree shaker’s input shaft. Slide the yoke onto the splines or into the keyway and secure with the appropriate locking mechanism. If a torque limiter is present, ensure it is correctly oriented per the manufacturer’s markings.
Langkah 5: Pasang Pelindung Keamanan
Geser kedua bagian pelindung ke atas poros dan sambungkan menggunakan klip yang disediakan. Pasang rantai penahan pelindung—satu ke batang penarik traktor atau titik tetap, satu ke rangka alat pertanian. Pelindung harus dapat berputar bebas dan tidak boleh dipasang pada komponen yang berputar.
Langkah 6: Pemeriksaan Akhir & Uji Coba
Pastikan semua sambungan terpasang dengan aman. Hidupkan mesin traktor dan aktifkan PTO pada kecepatan idle. Amati poros untuk melihat apakah putarannya lancar, getaran yang tidak biasa, atau suara bising. Tingkatkan kecepatan secara bertahap hingga kecepatan operasi. Periksa kembali semua pengencang setelah satu jam pengoperasian pertama.
PTO Shaft Troubleshooting Guide for Tree Shaker
| Gejala | Kemungkinan Penyebab | Tindakan yang Disarankan |
|---|---|---|
| Overload clutch slipping under normal load | Clutch plates worn or contaminated; incorrect torque setting | Adjust clutch torque setting; replace clutch plates if worn or oil-contaminated |
| Poros tidak akan memanjang dengan mulus. | Korosi atau kotoran di dalam tabung profil; pelumasan yang tidak memadai. | Bersihkan dan lumasi tabung profil; ganti jika terlihat goresan. |
| Excessive vibration during operation | Worn U-joint cross bearings; shaft out of balance; excessive operating angle | Replace U-joint cross kit; check yoke alignment; reduce operating angle to <25° |
| Suara mendesing atau berderak yang tidak biasa | Kerusakan bantalan input gearbox; poros tidak sejajar | Periksa kotak roda gigi alat pertanian; sejajarkan kembali traktor dan alat pertanian; periksa tumpang tindih panjang poros. |
| Menerapkan kecepatan yang tidak konsisten | Poros PTO selip; spline aus; kopling terhubung sebagian | Periksa pengait poros; ganti poros jika alur aus; setel atau ganti rakitan kopling. |
| Poros PTO terputus selama pengoperasian | Kerah pengunci aus; alur penahan pada poros PTO rusak. | Ganti dudukan pelepas cepat; periksa dan perbaiki alur poros PTO jika aus. |
| Bunyi klik atau ketukan pada kecepatan rendah | Bantalan jarum sambungan U aus; dudukan longgar pada poros PTO | Ganti rakitan sambungan U; periksa keausan spline dan mekanisme penguncian yoke. |
| Penumpukan panas pada sambungan U | Pelumasan tidak memadai; sudut operasi berlebihan; kerusakan bantalan. | Segera lumasi sambungan U; kurangi sudut pengoperasian; ganti kit silang jika bantalan rusak. |
Case Studies – PTO Shaft for Tree Shaker in Australia
Catatan lapangan dari tim teknik dan penjualan kami di seluruh Australia:
📍 Port Lincoln, SA – Robert Wilson
Tujuan: Upgraded from a light-duty shaft to a heavy-duty series for commercial-scale mechanical fruit and nut harvesting
Masukan: “Mekanik kami terkesan dengan presisi alur dan kualitas bantalan jarumnya. Dia mengatakan ini adalah poros aftermarket terbaik yang pernah dipasangnya dalam 20 tahun.”
📍 Mount Isa, QLD – Michael Carter
Tujuan: Upgraded overload protection from shear bolt to friction clutch for smoother mechanical fruit and nut harvesting
Masukan: “The safety guards are solid and rotate freely. They actually meet the WHS requirements unlike the cheap ones you get from other suppliers.”
📍 Bunbury, WA – Wayne Morrison
Tujuan: Outfitted a newly purchased second-hand tree shaker with a reliable aftermarket PTO shaft
Masukan: “Pengiriman cepat ke wilayah regional Australia. Poros tiba dalam kemasan yang baik dan sambungan U-nya sangat halus. Sangat terkesan dengan kualitas pembuatannya.”
📍 Wangaratta, VIC – Neville Grant
Tujuan: Replaced a worn PTO shaft on a 3-year-old tree shaker to restore full operating efficiency
Masukan: “We run our tree shaker hard across 2,000 hectares and this shaft hasn’t missed a beat after two full seasons. Exceptional value for money.”
📍 Toowoomba, QLD – Phil Bennett
Tujuan: Membutuhkan poros dengan panjang khusus untuk jarak traktor-ke-peralatan yang tidak standar.
Masukan: “Kopling gesek terintegrasi menyelamatkan gearbox saya ketika kami menabrak batu yang terkubur. Poros langsung terlepas dan terhubung kembali setelah halangan teratasi. Sangat berharga.”
Frequently Asked Questions – PTO Shaft for Tree Shaker
❓ Apakah Anda melakukan pengiriman ke wilayah regional dan terpencil di Australia?
Tentu saja. Kami mengirimkan ke semua kode pos Australia melalui perusahaan pengiriman barang utama. Daerah regional dan terpencil mungkin memiliki waktu transit yang sedikit lebih lama, tetapi kami bekerja sama dengan berbagai perusahaan pengiriman untuk memastikan pengiriman yang andal di seluruh negeri.
❓ Can I use a 540 rpm shaft on a 1000 rpm PTO?
No. Using a shaft rated for 540 rpm on a 1000 rpm PTO will result in excessive speed, dangerous vibration, and potential catastrophic failure. Always match the shaft speed rating to both the tractor PTO setting and the implement requirement.
❓ Can the shaft be shortened to fit my setup?
Yes. The telescoping profile tubes can be cut to a shorter length using an angle grinder or chop saw. Ensure a minimum of 1/3 overlap remains between the inner and outer tubes after cutting. Deburr all cut edges before reassembly.
❓ Apakah poros PTO Anda seimbang?
Ya. Semua rakitan poros PTO kami diseimbangkan secara dinamis selama proses pembuatan. Hal ini mengurangi getaran, memperpanjang umur bantalan, dan memberikan pengoperasian yang lebih halus dibandingkan dengan alternatif aftermarket yang tidak seimbang.
❓ What PTO shaft series do I need for my tree shaker?
For most tree shaker applications in the 80–350 HP range, we recommend the T5 / L5 (Heavy duty) or T6 / L6 (Super heavy duty) series. If you operate near the upper end of this range or in particularly demanding conditions, consider stepping up to the S8 (Wide-angle) series for additional safety margin.
❓ Can I upgrade my existing tree shaker PTO shaft to a heavier series?
Dalam kebanyakan kasus, ya. Selama ukuran spline yoke sesuai dengan poros PTO traktor dan poros input implement Anda, Anda dapat melakukan upgrade ke seri yang lebih berat untuk meningkatkan kapasitas torsi dan daya tahan. Tim teknis kami dapat memberikan saran tentang jalur upgrade yang tepat untuk peralatan Anda.
❓ Will this shaft fit my tractor and tree shaker?
Our PTO shafts are available with all standard yoke types and spline sizes (1-3/8" 6-spline, 1-3/4" 6-spline, 1-3/4" 20-spline, and more). Provide your tractor model and tree shaker make/model, and our team will confirm compatibility before dispatch.
❓ Garansi apa yang Anda tawarkan untuk poros PTO?
Semua poros PTO memiliki garansi pabrik terhadap cacat material dan pengerjaan. Ketentuan garansi berbeda-beda tergantung serinya. Hubungi tim kami untuk detail garansi spesifik yang berlaku untuk pembelian Anda.
Produk Terkait
Complement your Tree Shaker PTO shaft with these products from our range:
Your Tree Shaker PTO Shaft Partner
From single-unit orders to container-load shipments, we are your dedicated partner for tree shaker PTO shaft supply. Our commitment to quality, competitive pricing, and responsive service has earned us the trust of farmers and dealers across Australia.
Take the next step: Contact us today for a free consultation and custom quotation tailored to your exact requirements.