Premium PTO Shaft Solution for Spading Machine Operations
Efficient deep soil turning and aeration with a spading machine hinges on the quality of its PTO shaft connection. Our PTO shaft for spading machine is purpose-designed to transfer tractor power reliably across varying field conditions. From the universal joints to the telescoping tubes, every component is selected for durability and compatibility with leading tractor brands. Explore our full range of PTO shafts.
Technical Specifications – Spading Machine PTO Shaft
| Parameter | Spesifikasi / Rentang yang Dapat Disesuaikan |
|---|---|
| Aplikasi | Spading Machine |
| Rekomendasi Tenaga Kuda Traktor | 60–180 HP |
| Kecepatan PTO | 1000 rpm |
| Torsi Kontinu Maksimum | 400–1200 Nm |
| Kapasitas Torsi Puncak | 1800 Nm |
| Seri Poros | T4 / L4 (Medium-heavy duty) / T5 / L5 (Heavy duty) / T6 / L6 (Super heavy duty) |
| Diameter Tabung Luar | 65 mm |
| Closed Length (Lmin) | 800–1300 mm (customisable) |
| Universal Joint Cross Size | 27×70 mm / 30.2×92 mm / 27×74.5 mm |
| Pelumas yang Direkomendasikan | EP2 lithium |
| Kekerasan Spline | HRC 60-65 |
| Perawatan Permukaan | Yellow zinc plated |
| Sudut Operasi Maksimum | 25° |
| Berat Rakitan | 14–31 kg (varies by length) |
| Kisaran Suhu Operasional | -25°C to +80°C |
| Warna Penjaga | Black |
| Yoke Material | Forged carbon steel (C45) |
| Opsi Perlindungan Beban Berlebih | Ratchet torque limiter / Shear bolt torque limiter / Free-wheel overrunning clutch |
| Opsi Yoke Ujung Implementasi | Flange yoke / Splined yoke (1-3/8″ 21-spline) |
| Dynamic Balance | Dynamically balanced to ISO 1940 G6.3 |
How the PTO Shaft Operates in Spading Machine Applications
The PTO shaft serves as the mechanical bridge between tractor and spading machine. Mounted between the tractor’s rear PTO outlet and the implement’s input connection, it converts the tractor’s stationary-axis rotation into a flexible, articulating power stream that can follow the implement through field manoeuvres.
Internally, two precision universal joints provide up to 25° of operating angle, while the profile tube telescopes to accommodate the variable distance between tractor and implement during deep soil turning and aeration. The shaft rotates at the selected PTO speed, delivering continuous torque to power the spading machine’s working components.
Built into the assembly is a torque-limiting device—either a friction clutch, shear bolt, or cam-release mechanism—positioned at the implement end. This device automatically disengages when torque exceeds a set threshold, preventing damage to both the PTO shaft and the spading machine’s internal gearing.
Core Advantages of Our PTO Shaft for Spading Machine
⚙ Needle-Bearing U-Joints
Premium needle-bearing universal joints in our spading machine PTO shaft handle higher radial loads and last up to 3x longer than plain bearing alternatives.
🔨 Modular Assembly
Modular design lets you replace individual components—yokes, tubes, U-joints, guards—without replacing the entire shaft assembly.
🔒 Dual-Direction Protection
Overrunning clutches prevent reverse torque from damaged implements from feeding back into the tractor’s PTO gearbox.
⚖ Vibration-Dampened
Precision-machined profile tubes and balanced assemblies produce significantly less vibration, reducing operator fatigue during long shifts.
🛠 Colour-Coded Series
Series identification is simple with our colour-coded guard system—match the colour to your required torque rating instantly.
🌍 Fast Australian Delivery
Stocked in Australian warehouses for rapid dispatch—most orders ship within 48 hours to anywhere on the continent.
Kompatibilitas Merek & Suku Cadang Pengganti
Kita PTO shaft for spading machine dirancang sebagai pengganti langsung untuk rakitan poros penggerak yang dipasok oleh Walterscheid, Benzi & Di Terlizzi, Profil Terhubung, Eurocardan, MecLine, GKN Walterscheiddan lain-lain. Kami menyediakan panduan referensi silang untuk membantu Anda mengidentifikasi poros yang tepat untuk peralatan Anda yang sudah ada.
⚠ Nama merek hanya dirujuk untuk tujuan identifikasi kompatibilitas silang. Kami tidak berafiliasi dengan, dan kami tidak mengklaim dukungan dari, merek-merek yang disebutkan. Semua merek dagang tetap menjadi hak milik dari pemiliknya masing-masing.
Suku Cadang & Aksesoris
Setiap komponen poros PTO kami tersedia secara individual: kit sambungan U, penyangga (ujung traktor dan ujung implement), tabung profil, pelindung keselamatan, rantai pelindung, pembatas torsi, dan kit bantalan. Ini berarti Anda dapat melakukan servis dan perbaikan poros Anda tanpa batas, sehingga mengurangi biaya kepemilikan jangka panjang.
Peraturan, Kepatuhan & Pertimbangan SEO Lokal
Standar Keselamatan Australia
All PTO shafts supplied for spading machine applications comply with AS 1121 (Power take-offs for agricultural tractors) and AS/NZS 4024.1 (Safety of machinery). Safety guards meet the guarding requirements of Safe Work Australia’s model WHS Regulations.
Kepatuhan CE & ISO
Fasilitas manufaktur kami memegang sertifikasi ISO 9001:2015. Rakitan poros dirancang sesuai dengan ISO 5673 (Traktor dan mesin pertanian – poros penggerak PTO) dan diberi tanda CE jika berlaku.
Persyaratan Negara Bagian & Wilayah
Peralatan yang digerakkan PTO di seluruh Queensland, New South Wales, Victoria, Western Australia, South Australia, dan Tasmania harus mematuhi kode praktik K3 setempat untuk mesin pertanian. Poros kami dilengkapi dengan semua pengaman dan dokumentasi keselamatan yang diperlukan untuk memenuhi kewajiban ini.
PTO Shaft Selection Guide – Spading Machine
Selecting the right PTO shaft for your spading machine is straightforward when you follow this step-by-step guide. Gather the information below before placing your order.
| Step | Action | Details for Spading Machine |
|---|---|---|
| 1 | Identify tractor PTO HP | Typical: 60–180 HP for this application |
| 2 | Confirm PTO speed setting | 540 rpm or 1000 rpm (check implement manual) |
| 3 | Measure closed length (Lmin) | 800–1300 mm |
| 4 | Count tractor PTO splines | 6-spline (1-3/8") or 6-spline (1-3/4") most common |
| 5 | Check implement input connection | Splined, keyed, or flanged input |
| 6 | Calculate torque requirement | 400–1200 Nm |
| 7 | Select shaft series | T4 / L4 (Medium-heavy duty) or T5 / L5 (Heavy duty) |
| 8 | Choose overload protection | Friction clutch recommended for spading machine |
📌 Need help? Hubungi kami for expert guidance.
Targeted Installation Procedure – Spading Machine PTO Shaft
⚠ Safety First: Disengage the PTO, switch off the engine, remove the ignition key, and allow all moving parts to come to a complete stop before working on the driveline. Wear appropriate PPE including close-fitting clothing and gloves.
Phase 1: Preparation
Lay out all shaft components and cross-reference against the packing list. Confirm the shaft series, closed length, and yoke specifications match your spading machine setup. Grease all U-joint nipples and slide the profile tubes back and forth several times to distribute lubricant.
Phase 2: Length Verification
With the spading machine hitched to the tractor in its normal operating position, measure the PTO-to-input distance. The shaft must have a minimum of 1/3 tube overlap at full extension and must not bottom out at the shortest position. Trim the tubes if the factory length requires adjustment (refer to cutting instructions in the product manual).
Phase 3: Tractor Connection
Push the tractor-end yoke fully onto the PTO stub. The quick-release collar should snap over the retaining groove. Pull back on the yoke to confirm it is locked. If using a plain-bore yoke, insert the shear pin and secure with a cotter pin.
Phase 4: Implement Connection
Connect the implement-end yoke to the spading machine’s input. If a clutch assembly is fitted at this end, ensure the clutch housing is oriented with the grease nipple accessible. Tighten any set screws to the specified torque.
Phase 5: Guard Fitting
Assemble the two guard halves around the shaft and clip together. Attach the anti-rotation chains: one chain to a stationary tractor point, one chain to the implement frame. Verify the guards spin freely by hand without contacting any part of the shaft or yokes.
Phase 6: Operational Test
Start the tractor, engage PTO at low idle, and run the spading machine unloaded for two to three minutes. Check for vibration, abnormal noise, or heat at the U-joints. If all checks pass, proceed to normal operating speed and begin field work. Re-torque all fasteners after the initial run-in period.
PTO Shaft Troubleshooting Guide for Spading Machine
⚠ Implement speed inconsistent
Possible Cause: Poros PTO selip; spline aus; kopling terhubung sebagian
Recommended Action: Periksa pengait poros; ganti poros jika alur aus; setel atau ganti rakitan kopling.
⚠ Overload clutch slipping under normal load
Possible Cause: Clutch plates worn or contaminated; incorrect torque setting
Recommended Action: Adjust clutch torque setting; replace clutch plates if worn or oil-contaminated
⚠ Heat build-up at U-joint
Possible Cause: Pelumasan tidak memadai; sudut operasi berlebihan; kerusakan bantalan.
Recommended Action: Segera lumasi sambungan U; kurangi sudut pengoperasian; ganti kit silang jika bantalan rusak.
⚠ PTO shaft disconnects during operation
Possible Cause: Kerah pengunci aus; alur penahan pada poros PTO rusak.
Recommended Action: Ganti dudukan pelepas cepat; periksa dan perbaiki alur poros PTO jika aus.
⚠ Safety guard not rotating freely
Possible Cause: Bantalan pelindung macet; pelindung rusak atau tidak sejajar
Recommended Action: Ganti bantalan pelindung; luruskan atau ganti bagian pelindung; pasang kembali rantai dengan benar.
⚠ Unusual whining or grinding sound
Possible Cause: Kerusakan bantalan input gearbox; poros tidak sejajar
Recommended Action: Periksa kotak roda gigi alat pertanian; sejajarkan kembali traktor dan alat pertanian; periksa tumpang tindih panjang poros.
⚠ Shaft will not telescope smoothly
Possible Cause: Korosi atau kotoran di dalam tabung profil; pelumasan yang tidak memadai.
Recommended Action: Bersihkan dan lumasi tabung profil; ganti jika terlihat goresan.
⚠ Clicking or knocking noise at low speed
Possible Cause: Bantalan jarum sambungan U aus; dudukan longgar pada poros PTO
Recommended Action: Ganti rakitan sambungan U; periksa keausan spline dan mekanisme penguncian yoke.
Case Studies – PTO Shaft for Spading Machine in Australia
Catatan lapangan dari tim teknik dan penjualan kami di seluruh Australia:
📍 Shepparton, VIC – Luke Ashworth
Tujuan: Upgraded from a light-duty shaft to a heavy-duty series for commercial-scale deep soil turning and aeration
Masukan: “We run our spading machine hard across 2,000 hectares and this shaft hasn’t missed a beat after two full seasons. Exceptional value for money.”
📍 Northam, WA – Stuart Palmer
Tujuan: Upgraded overload protection from shear bolt to friction clutch for smoother deep soil turning and aeration
Masukan: “Pengiriman cepat ke wilayah regional Australia. Poros tiba dalam kemasan yang baik dan sambungan U-nya sangat halus. Sangat terkesan dengan kualitas pembuatannya.”
📍 Wagga Wagga, NSW – Paul Walker
Tujuan: Needed a direct-fit replacement after the original shaft suffered a U-joint failure mid-season
Masukan: “We swapped out our old economy shaft for this one and noticed an immediate reduction in vibration. The tractor runs quieter and the implement operates smoother.”
📍 Bathurst, NSW – Alan Cooper
Tujuan: Membutuhkan poros dengan panjang khusus untuk jarak traktor-ke-peralatan yang tidak standar.
Masukan: “Fitted perfectly to my spading machine with zero modification. The quality is noticeably better than the OEM shaft it replaced. I’ll be ordering more for my other implements.”
📍 Orange, NSW – Dean Hartley
Tujuan: Membeli satu set lengkap poros PTO sebagai suku cadang untuk musim sibuk.
Masukan: “Kopling gesek terintegrasi menyelamatkan gearbox saya ketika kami menabrak batu yang terkubur. Poros langsung terlepas dan terhubung kembali setelah halangan teratasi. Sangat berharga.”
Frequently Asked Questions – PTO Shaft for Spading Machine
❓ Will this shaft fit my tractor and spading machine?
Our PTO shafts are available with all standard yoke types and spline sizes (1-3/8" 6-spline, 1-3/4" 6-spline, 1-3/4" 20-spline, and more). Provide your tractor model and spading machine make/model, and our team will confirm compatibility before dispatch.
❓ What PTO shaft series do I need for my spading machine?
For most spading machine applications in the 60–180 HP range, we recommend the T4 / L4 (Medium-heavy duty) or T5 / L5 (Heavy duty) series. If you operate near the upper end of this range or in particularly demanding conditions, consider stepping up to the S8 (Wide-angle) series for additional safety margin.
❓ Can I use a 540 rpm shaft on a 1000 rpm PTO?
No. Using a shaft rated for 540 rpm on a 1000 rpm PTO will result in excessive speed, dangerous vibration, and potential catastrophic failure. Always match the shaft speed rating to both the tractor PTO setting and the implement requirement.
❓ Apakah Anda melakukan pengiriman ke wilayah regional dan terpencil di Australia?
Tentu saja. Kami mengirimkan ke semua kode pos Australia melalui perusahaan pengiriman barang utama. Daerah regional dan terpencil mungkin memiliki waktu transit yang sedikit lebih lama, tetapi kami bekerja sama dengan berbagai perusahaan pengiriman untuk memastikan pengiriman yang andal di seluruh negeri.
❓ Seberapa sering saya harus melumasi poros PTO?
Lumasi semua nipel sambungan U setiap 8–10 jam pengoperasian, atau di awal setiap hari kerja. Lumasi tabung profil teleskopik pada interval yang sama. Gunakan gemuk kompleks litium EP2 atau seperti yang direkomendasikan dalam manual produk Anda.
❓ Bagaimana cara mengukur panjang tertutup yang tepat?
Pasang alat pertanian ke traktor pada posisi kerja normalnya. Ukur jarak garis lurus dari permukaan poros PTO traktor ke permukaan poros input alat pertanian. Panjang poros saat tertutup harus sekitar 10–15 mm lebih pendek dari pengukuran ini.
❓ Apakah poros PTO Anda seimbang?
Ya. Semua rakitan poros PTO kami diseimbangkan secara dinamis selama proses pembuatan. Hal ini mengurangi getaran, memperpanjang umur bantalan, dan memberikan pengoperasian yang lebih halus dibandingkan dengan alternatif aftermarket yang tidak seimbang.
❓ Garansi apa yang Anda tawarkan untuk poros PTO?
Semua poros PTO memiliki garansi pabrik terhadap cacat material dan pengerjaan. Ketentuan garansi berbeda-beda tergantung serinya. Hubungi tim kami untuk detail garansi spesifik yang berlaku untuk pembelian Anda.
Produk Terkait
Complement your Spading Machine PTO shaft with these products from our range:
Partner With Us – Spading Machine PTO Shaft Solutions
Whether you are a farmer seeking a single replacement shaft, a dealer looking to stock reliable driveline products, or an OEM manufacturer requiring bulk supply, we are ready to support your needs. Our spading machine PTO shafts are available in standard and custom configurations, with competitive pricing for volume orders.
📞 Hubungi tim kami hari ini Untuk mendiskusikan kebutuhan Anda, meminta penawaran harga, atau mengatur konsultasi teknis. Kami berkomitmen untuk memberikan poros yang tepat, tepat waktu, setiap saat.