{"id":1066,"date":"2026-03-20T05:48:22","date_gmt":"2026-03-20T05:48:22","guid":{"rendered":"https:\/\/ptoparts.top\/application\/pto-shaft-for-hayrake\/"},"modified":"2026-03-20T05:48:22","modified_gmt":"2026-03-20T05:48:22","slug":"pto-shaft-for-hayrake","status":"publish","type":"post","link":"https:\/\/ptoparts.top\/fr\/application\/pto-shaft-for-hayrake\/","title":{"rendered":"PTO Shaft for Hayrake"},"content":{"rendered":"

Durable PTO Shaft for Hayrake – Australian-Ready Design<\/h2>\n

Australia’s vast and varied agricultural landscape places extraordinary demands on farm equipment. The PTO shaft for hayrake<\/strong> must withstand dust, heat, vibration, and long operating hours associated with hay windrow formation. Our shaft assemblies are built to thrive in these conditions, offering a direct-fit replacement that meets or exceeds OEM specifications. Visit our homepage<\/a> to learn more.<\/p>\n

\"PTO<\/p>\n

Technical Specifications – Hayrake PTO Shaft<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Param\u00e8tre<\/th>\nSpecification \/ Customisable Range<\/th>\n<\/tr>\n<\/thead>\n
Application<\/td>\nHayrake<\/td>\n<\/tr>\n
Recommended Tractor HP<\/td>\n15–50 HP<\/td>\n<\/tr>\n
Vitesse de prise de force<\/td>\n540 rpm (Economy)<\/td>\n<\/tr>\n
Maximum Continuous Torque<\/td>\n100–300 Nm<\/td>\n<\/tr>\n
Peak Torque Capacity<\/td>\n450 Nm<\/td>\n<\/tr>\n
Shaft Series<\/td>\nT1 \/ L1 (Light duty) \/ T2 \/ L2 (Light-medium duty) \/ G1 (Compact)<\/td>\n<\/tr>\n
Yoke Material<\/td>\nForged carbon steel (C45)<\/td>\n<\/tr>\n
Implement-End Yoke Options<\/td>\nSplined yoke (1-3\/8″ 21-spline) \/ Plain bore yoke<\/td>\n<\/tr>\n
Assembly Weight<\/td>\n15–38 kg (varies by length)<\/td>\n<\/tr>\n
Overload Protection Options<\/td>\nFriction clutch torque limiter \/ Free-wheel overrunning clutch \/ Ratchet torque limiter<\/td>\n<\/tr>\n
Outer Tube Diameter<\/td>\n47.4 mm<\/td>\n<\/tr>\n
Operating Temperature Range<\/td>\n-30°C to +100°C<\/td>\n<\/tr>\n
U-Joint Bearing Type<\/td>\nGreased needle roller<\/td>\n<\/tr>\n
Tube Wall Thickness<\/td>\n4.5 mm<\/td>\n<\/tr>\n
Dynamic Balance<\/td>\nDynamically balanced to ISO 1940 G16<\/td>\n<\/tr>\n
Recommended Lubricant<\/td>\nNLGI #2 multi-purpose<\/td>\n<\/tr>\n
Surface Treatment<\/td>\nYellow zinc plated<\/td>\n<\/tr>\n
Maximum Operating Angle<\/td>\n25°<\/td>\n<\/tr>\n
Spline Hardness<\/td>\nHRC 58-62<\/td>\n<\/tr>\n
Universal Joint Cross Size<\/td>\n23.8\u00d761.3 mm \/ 22\u00d754.8 mm \/ 30.2\u00d792 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

How a PTO Shaft Works on a Hayrake<\/h2>\n

The PTO shaft transmits rotational energy from the tractor’s rear PTO stub to the input shaft of the hayrake. The assembly consists of two yokes connected by a telescoping profile tube, with universal joints (U-joints) at each end allowing angular misalignment as the tractor and implement articulate over uneven ground.<\/p>\n

During hay windrow formation, the tractor PTO stub rotates at a standardised speed. This rotation passes through the first U-joint, travels along the profile tube (which telescopes to accommodate changes in distance), and exits through the second U-joint into the implement gearbox. A safety guard encloses the entire rotating assembly to prevent entanglement.<\/p>\n

On the hayrake specifically, the PTO shaft drives the main gearbox, which in turn powers the working elements. Overload protection—typically a shear bolt or friction clutch—is integrated at the implement-end yoke to safeguard the driveline against sudden blockages or shock loads.<\/p>\n

\"PTO<\/p>\n

Core Advantages of Our PTO Shaft for Hayrake<\/h2>\n
\n
\n

⚙ Heat-Treated Components<\/h3>\n

Every yoke and U-joint cross in our hayrake PTO shaft is induction-hardened and tempered, delivering superior fatigue resistance compared to standard cast components.<\/p>\n<\/div>\n

\n

⚖ Precision-Balanced Assembly<\/h3>\n

Computer-balanced shaft assemblies minimise vibration, reducing wear on tractor and implement bearings and extending overall driveline life.<\/p>\n<\/div>\n

\n

🔒 Integrated Overload Protection<\/h3>\n

Factory-fitted torque limiters protect your investment by automatically disengaging under shock loads, preventing costly repairs to gearboxes and drivelines.<\/p>\n<\/div>\n

\n

🔧 Telescoping Design<\/h3>\n

Profile tubes telescope smoothly to accommodate field undulations and turning manoeuvres, ensuring consistent power delivery during operation.<\/p>\n<\/div>\n

\n

🛡 Full Safety Guarding<\/h3>\n

CE-compliant safety shields with bearing-mounted rotation enclose the entire shaft, meeting Australian WHS requirements and protecting operators.<\/p>\n<\/div>\n

\n

🏆 Extended Warranty<\/h3>\n

We stand behind our products with an industry-leading warranty, reflecting our confidence in the durability and reliability of every PTO shaft we supply.<\/p>\n<\/div>\n<\/div>\n

Compatible Brands & Interchangeable Parts<\/h2>\n

Farmers and contractors running hayrake equipment from Profile Connect<\/strong>, MecLine<\/strong>, Eurocardan<\/strong>, Shafto<\/strong>, Comer Industries<\/strong>, Weasler<\/strong> will find our PTO shaft a seamless replacement. We maintain a comprehensive compatibility database to match our products to thousands of OEM part numbers.<\/p>\n

⚠ References to third-party brands are provided exclusively to facilitate product selection and cross-referencing. We do not manufacture products for these brands, nor do we hold or claim any rights to their trademarks.<\/em><\/p>\n

Replacement Components<\/h3>\n

All shaft components are available as individual spares: universal joint kits, yokes in all standard bore sizes, telescoping tubes in various profiles, moulded safety guards, torque limiter assemblies, and complete rebuild kits. Extended availability ensures your shaft remains serviceable for years.<\/p>\n

Standards, Policies & Regional Compliance<\/h2>\n

Australian Agricultural Machinery Standards<\/h3>\n

Our PTO shafts for hayrake applications are manufactured in compliance with the ASABE S203 (Guard dimensions) and ISO 5673 (PTO drive shaft interfaces) standards. These standards ensure dimensional compatibility and operational safety across all Australian farming environments.<\/p>\n

Environmental Considerations<\/h3>\n

All materials used in our PTO shafts are RoHS-compliant. Packaging is recyclable, and we offer a used-shaft return programme for environmentally responsible disposal of end-of-life components.<\/p>\n

Regional Service Coverage<\/h3>\n

We provide service and technical support across all Australian states and territories, including regional and remote areas. Local dealers in major agricultural centres stock our most popular shaft series and replacement parts for immediate availability.<\/p>\n

\"PTO<\/p>\n

PTO Shaft Selection Guide – Hayrake<\/h2>\n

Selecting the right PTO shaft for your hayrake is straightforward when you follow this step-by-step guide. Gather the information below before placing your order.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Step<\/th>\nAction<\/th>\nDetails for Hayrake<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nIdentify tractor PTO HP<\/td>\nTypical: 15–50 HP for this application<\/td>\n<\/tr>\n
2<\/td>\nConfirm PTO speed setting<\/td>\n540 rpm or 1000 rpm (check implement manual)<\/td>\n<\/tr>\n
3<\/td>\nMeasure closed length (Lmin<\/sub>)<\/td>\n600–900 mm<\/td>\n<\/tr>\n
4<\/td>\nCount tractor PTO splines<\/td>\n6-spline (1-3\/8") or 6-spline (1-3\/4") most common<\/td>\n<\/tr>\n
5<\/td>\nCheck implement input connection<\/td>\nSplined, keyed, or flanged input<\/td>\n<\/tr>\n
6<\/td>\nCalculate torque requirement<\/td>\n100–300 Nm<\/td>\n<\/tr>\n
7<\/td>\nSelect shaft series<\/td>\nT1 \/ L1 (Light duty) or T2 \/ L2 (Light-medium duty)<\/td>\n<\/tr>\n
8<\/td>\nChoose overload protection<\/td>\nFriction clutch recommended for hayrake<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

📌 Need help? Contact us<\/a> for expert guidance.<\/p>\n

Targeted Installation Procedure – Hayrake PTO Shaft<\/h2>\n

⚠ Safety First:<\/strong> Disengage the PTO, switch off the engine, remove the ignition key, and allow all moving parts to come to a complete stop before working on the driveline. Wear appropriate PPE including close-fitting clothing and gloves.<\/p>\n

Phase 1: Preparation<\/h3>\n

Lay out all shaft components and cross-reference against the packing list. Confirm the shaft series, closed length, and yoke specifications match your hayrake setup. Grease all U-joint nipples and slide the profile tubes back and forth several times to distribute lubricant.<\/p>\n

Phase 2: Length Verification<\/h3>\n

With the hayrake hitched to the tractor in its normal operating position, measure the PTO-to-input distance. The shaft must have a minimum of 1\/3 tube overlap at full extension and must not bottom out at the shortest position. Trim the tubes if the factory length requires adjustment (refer to cutting instructions in the product manual).<\/p>\n

Phase 3: Tractor Connection<\/h3>\n

Push the tractor-end yoke fully onto the PTO stub. The quick-release collar should snap over the retaining groove. Pull back on the yoke to confirm it is locked. If using a plain-bore yoke, insert the shear pin and secure with a cotter pin.<\/p>\n

Phase 4: Implement Connection<\/h3>\n

Connect the implement-end yoke to the hayrake’s input. If a clutch assembly is fitted at this end, ensure the clutch housing is oriented with the grease nipple accessible. Tighten any set screws to the specified torque.<\/p>\n

Phase 5: Guard Fitting<\/h3>\n

Assemble the two guard halves around the shaft and clip together. Attach the anti-rotation chains: one chain to a stationary tractor point, one chain to the implement frame. Verify the guards spin freely by hand without contacting any part of the shaft or yokes.<\/p>\n

Phase 6: Operational Test<\/h3>\n

Start the tractor, engage PTO at low idle, and run the hayrake unloaded for two to three minutes. Check for vibration, abnormal noise, or heat at the U-joints. If all checks pass, proceed to normal operating speed and begin field work. Re-torque all fasteners after the initial run-in period.<\/p>\n

\"Installing<\/p>\n

PTO Shaft Troubleshooting Guide for Hayrake<\/h2>\n
\n⚠ Clicking or knocking noise at low speed<\/summary>\n
\n

Possible Cause:<\/strong> Worn U-joint needle bearings; loose yoke on PTO stub<\/p>\n

Recommended Action:<\/strong> Replace U-joint assembly; check spline wear and yoke locking mechanism<\/p>\n<\/div>\n<\/details>\n

\n⚠ Shaft will not telescope smoothly<\/summary>\n
\n

Possible Cause:<\/strong> Corrosion or debris in profile tubes; insufficient lubrication<\/p>\n

Recommended Action:<\/strong> Clean and grease profile tubes; replace if scoring is visible<\/p>\n<\/div>\n<\/details>\n

\n⚠ Safety guard not rotating freely<\/summary>\n
\n

Possible Cause:<\/strong> Guard bearings seized; guard damaged or misaligned<\/p>\n

Recommended Action:<\/strong> Replace guard bearings; straighten or replace guard halves; re-attach chains correctly<\/p>\n<\/div>\n<\/details>\n

\n⚠ Unusual whining or grinding sound<\/summary>\n
\n

Possible Cause:<\/strong> Gearbox input bearing failure; misaligned shaft<\/p>\n

Recommended Action:<\/strong> Inspect implement gearbox; re-align tractor and implement; check shaft length overlap<\/p>\n<\/div>\n<\/details>\n

\n⚠ Excessive vibration during operation<\/summary>\n
\n

Possible Cause:<\/strong> Worn U-joint cross bearings; shaft out of balance; excessive operating angle<\/p>\n

Recommended Action:<\/strong> Replace U-joint cross kit; check yoke alignment; reduce operating angle to <25°<\/p>\n<\/div>\n<\/details>\n

\n⚠ Implement speed inconsistent<\/summary>\n
\n

Possible Cause:<\/strong> PTO shaft slipping; worn splines; clutch partially engaged<\/p>\n

Recommended Action:<\/strong> Check yoke engagement; replace yoke if splines are worn; adjust or replace clutch assembly<\/p>\n<\/div>\n<\/details>\n

\n⚠ PTO shaft disconnects during operation<\/summary>\n
\n

Possible Cause:<\/strong> Worn locking collar; damaged retaining groove on PTO stub<\/p>\n

Recommended Action:<\/strong> Replace quick-release yoke; inspect and repair PTO stub groove if worn<\/p>\n<\/div>\n<\/details>\n

\n⚠ Heat build-up at U-joint<\/summary>\n
\n

Possible Cause:<\/strong> Insufficient lubrication; excessive operating angle; bearing failure<\/p>\n

Recommended Action:<\/strong> Grease U-joints immediately; reduce operating angle; replace cross kit if bearings are damaged<\/p>\n<\/div>\n<\/details>\n

Case Studies – PTO Shaft for Hayrake in Australia<\/h2>\n

Field notes from our engineering and sales team across Australia:<\/em><\/p>\n

\n

📍 Wangaratta, VIC – Paul Walker<\/h3>\n

Purpose:<\/strong> Replaced a corroded shaft that had been exposed to chemical spray residues<\/p>\n

Feedback:<\/strong> “Our mechanic was impressed with the precision of the splines and the quality of the needle bearings. He said it’s the best aftermarket shaft he’s fitted in 20 years.”<\/p>\n<\/div>\n

\n

📍 Swan Hill, VIC – Stuart Palmer<\/h3>\n

Purpose:<\/strong> Upgraded from a light-duty shaft to a heavy-duty series for commercial-scale hay windrow formation<\/p>\n

Feedback:<\/strong> “The safety guards are solid and rotate freely. They actually meet the WHS requirements unlike the cheap ones you get from other suppliers.”<\/p>\n<\/div>\n

\n

📍 Bunbury, WA – Neville Grant<\/h3>\n

Purpose:<\/strong> Required a custom-length shaft for a non-standard tractor-to-implement spacing<\/p>\n

Feedback:<\/strong> “I ordered a replacement cross kit six months later and it arrived within 48 hours. Great product, great service, great support.”<\/p>\n<\/div>\n

\n

📍 Albany, WA – Angus McLeod<\/h3>\n

Purpose:<\/strong> Outfitted a newly purchased second-hand hayrake with a reliable aftermarket PTO shaft<\/p>\n

Feedback:<\/strong> “Fast delivery to regional Australia. The shaft arrived well-packaged and the U-joints are smooth as butter. Very impressed with the build quality.”<\/p>\n<\/div>\n

\n

📍 Carnarvon, WA – Russell Wright<\/h3>\n

Purpose:<\/strong> Needed a direct-fit replacement after the original shaft suffered a U-joint failure mid-season<\/p>\n

Feedback:<\/strong> “We swapped out our old economy shaft for this one and noticed an immediate reduction in vibration. The tractor runs quieter and the implement operates smoother.”<\/p>\n<\/div>\n

Frequently Asked Questions – PTO Shaft for Hayrake<\/h2>\n
\n❓ How do I measure the correct closed length?<\/summary>\n
\n

Hitch the implement to the tractor in its normal working position. Measure the straight-line distance from the face of the tractor PTO stub to the face of the implement input shaft. The shaft closed length should be approximately 10–15 mm less than this measurement.<\/p>\n<\/div>\n<\/details>\n

\n❓ Can the shaft be shortened to fit my setup?<\/summary>\n
\n

Yes. The telescoping profile tubes can be cut to a shorter length using an angle grinder or chop saw. Ensure a minimum of 1\/3 overlap remains between the inner and outer tubes after cutting. Deburr all cut edges before reassembly.<\/p>\n<\/div>\n<\/details>\n

\n❓ Are your PTO shafts balanced?<\/summary>\n
\n

Yes. All our PTO shaft assemblies are dynamically balanced during manufacture. This reduces vibration, extends bearing life, and provides smoother operation compared to unbalanced aftermarket alternatives.<\/p>\n<\/div>\n<\/details>\n

\n❓ How often should I grease the PTO shaft?<\/summary>\n
\n

Grease all U-joint nipples every 8–10 hours of operation, or at the start of each working day. Grease the telescoping profile tubes at the same interval. Use EP2 lithium-complex grease or as recommended in your product manual.<\/p>\n<\/div>\n<\/details>\n

\n❓ What PTO shaft series do I need for my hayrake?<\/summary>\n
\n

For most hayrake applications in the 15–50 HP range, we recommend the T1 \/ L1 (Light duty) or T2 \/ L2 (Light-medium duty) series. If you operate near the upper end of this range or in particularly demanding conditions, consider stepping up to the G1 (Compact) series for additional safety margin.<\/p>\n<\/div>\n<\/details>\n

\n❓ Will this shaft fit my tractor and hayrake?<\/summary>\n
\n

Our PTO shafts are available with all standard yoke types and spline sizes (1-3\/8" 6-spline, 1-3\/4" 6-spline, 1-3\/4" 20-spline, and more). Provide your tractor model and hayrake make\/model, and our team will confirm compatibility before dispatch.<\/p>\n<\/div>\n<\/details>\n

\n❓ What is the difference between a shear bolt and a friction clutch?<\/summary>\n
\n

A shear bolt is a sacrificial pin that breaks when torque exceeds its rated capacity. It is inexpensive but requires manual replacement after each event. A friction clutch slips when overloaded and automatically re-engages when the overload clears, offering uninterrupted operation in applications prone to frequent shock loads.<\/p>\n<\/div>\n<\/details>\n

\n❓ Can I upgrade my existing hayrake PTO shaft to a heavier series?<\/summary>\n
\n

In most cases, yes. As long as the yoke spline sizes match your tractor PTO stub and implement input shaft, you can upgrade to a heavier series for increased torque capacity and durability. Our technical team can advise on the correct upgrade path for your equipment.<\/p>\n<\/div>\n<\/details>\n

Related Products<\/h2>\n

Complement your Hayrake PTO shaft with these products from our range:<\/p>\n

\n
\n\"Agricultural<\/p>\n
\n

Agricultural Gearbox<\/h3>\n

We manufacture a full range of agricultural gearboxes<\/a> designed to pair seamlessly with our PTO shafts. Available in right-angle, inline, and T-type configurations.<\/p>\n<\/div>\n<\/div>\n

\n\"PTO<\/p>\n
\n

PTO Shaft Components & Accessories<\/h3>\n

U-joint cross kits, replacement yokes, profile tubes, safety guards, torque limiters, and more. All components are sold individually for easy maintenance and repair.<\/p>\n<\/div>\n<\/div>\n

\n\"PTO<\/p>\n
\n

Complete PTO Shaft Range<\/h3>\n

Browse our full catalogue of PTO drive shafts<\/a> covering light-duty through to extreme-duty applications across all agricultural, industrial, and municipal sectors.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

Your Hayrake PTO Shaft Partner<\/h2>\n

From single-unit orders to container-load shipments, we are your dedicated partner for hayrake PTO shaft supply. Our commitment to quality, competitive pricing, and responsive service has earned us the trust of farmers and dealers across Australia.<\/p>\n

Take the next step:<\/strong> Contact us today for a free consultation and custom quotation tailored to your exact requirements.<\/p>\n

💬 Talk to an Expert<\/a>  🌐 Browse All Products<\/a><\/p>","protected":false},"excerpt":{"rendered":"

Durable PTO Shaft for Hayrake – Australian-Ready Design Australia’s vast and varied agricultural landscape places extraordinary demands on farm equipment. The PTO shaft for hayrake must withstand dust, heat, vibration, and long operating hours associated with hay windrow formation. Our shaft assemblies are built to thrive in these conditions, offering a direct-fit replacement that meets […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[5402],"tags":[5653,5656,5658,5652,5657,183,5659,5654,5655],"class_list":["post-1066","post","type-post","status-publish","format-standard","hentry","category-pto-shaft","tag-hay-rake-driveline","tag-hay-rake-parts","tag-hay-tedder-driveline","tag-hayrake-pto-shaft","tag-light-duty-rake-pto-shaft","tag-pto-shaft","tag-rotary-rake-pto","tag-tedder-pto-shaft","tag-windrow-rake-drive-shaft"],"_links":{"self":[{"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/posts\/1066","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/comments?post=1066"}],"version-history":[{"count":0,"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/posts\/1066\/revisions"}],"wp:attachment":[{"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/media?parent=1066"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/categories?post=1066"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptoparts.top\/fr\/wp-json\/wp\/v2\/tags?post=1066"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}